Spa & Pool Filter Cleaner

Deep-Clean Your Filters for Better Filtration

Spa & Pool Filter Cleaner is a powerful filter-cleaning treatment designed to help clean different types of filtration systems. It can be used for spa cartridge filters, cartridge filters, diatomaceous earth filters, sand filters, and glass filters, with specific application methods provided for each filter type.

Regular filter cleaning helps remove accumulated debris and supports effective filtration. For best results, follow the appropriate cleaning procedure for your filter type.

Key Features

• Multi-Filter Application – Suitable for different filtration systems, including spa cartridge, cartridge, diatomaceous earth, sand, and glass filters.
• Deep Soaking Action – The recommended soaking process allows the cleaning solution time to work on the filter.
• Suitable for Spa Cartridge Filters – Designed specifically for cleaning removable spa cartridge filters.
• Suitable for Cartridge & Diatomaceous Earth Filters – Provides a dedicated cleaning procedure for these filter types.
• Suitable for Sand & Glass Filters – Can be applied directly inside the filter housing according to the instructions.

Benefits

Using a filter cleaner as part of your regular maintenance routine can help:

• Remove accumulated debris from filter elements
• Keep filter components cleaner
• Support normal filtration performance
• Maintain cleaner filtration equipment
• Extend the usefulness of regularly maintained filter components
• Make routine spa and pool maintenance easier

How to Use

1. Spa Cartridge Filters

Recommended mixture: 125 g in 20 L of warm water.

Stop the pump and remove the spa cartridge filter.

1. Rinse off any debris collected on the filter.

2. Add 125 g of product into a 20 L bucket of warm water, or enough solution to completely cover the filter.

3. Place the filter into the cleaning solution.

4. Soak for at least 12 hours.

5. Rinse the cartridge thoroughly.

6. Place the filter back into the spa and resume filtration.

2. Cartridge & Diatomaceous Earth Filters

Recommended mixture: 250 g in 50 L of cold water.

1. Dismantle the filter and hose the filter elements to remove loose debris.
2. Add 250 g of product to 50 L of cold water in a suitable container.
3. Place the filter elements into the diluted solution.
4. Allow them to soak for 24 hours for best results.
5. Rinse thoroughly.
6. Reassemble the filter and resume normal filtration.

3. Sand & Glass Filters

Recommended amount: 500 g per filter housing.

• Turn off the filter.
• Undo the filter cover.

Add 500 g to the filter housing and mix where possible.

DO NOT ADD TO THE POOL.

1. Allow the product to stand for 24 hours.

2. Backwash the filter thoroughly.

3. Follow with a RINSE cycle for 10 seconds, if available.

4. Resume normal filtration.

Important Safety Information

⚠️ READ BEFORE USE

• Keep the product away from children.

• Wear protective gloves and eye protection when handling.

• The product is strongly alkaline and may irritate the eyes and skin.

• Avoid contact with eyes and skin.

• Do not mix with other chemicals.

• Store separately from other chemicals.

• Keep in the closed original container.

• Store in a cool, dry place away from children.

• Do not store in direct sunlight.

Important Application Precaution

For sand and glass filters, do not add the product to the pool. It is added to the filter housing according to the specified cleaning procedure.

First Aid

If swallowed, do not induce vomiting. Rinse the mouth with water and give a glass of water.

If skin contact occurs, remove contaminated clothing and follow the product's first-aid instructions. If irritation or accidental ingestion occurs, seek medical advice immediately.

Product Specifications

Why Regular Filter Cleaning Matters

Filters collect debris as they operate. Cleaning the filter according to the manufacturer's recommended procedure helps maintain the filtration system and allows the filter to be returned to normal operation after cleaning. The supplied instructions specifically recommend rinsing the filter thoroughly before reassembly or resuming filtration.